Custom Search
RECENT POSTS

Wednesday, September 26, 2012

Optical and radiation pyrometers






Pyrometer
Pyrometer is a device which uses the relationship between the electromagnetic radiation emitted by a body and the temperature of this body. In order to better understand the phenomenon which forms the basis of pyrometry, it is useful to explain the concept of the blackbody, and the differences between it and real objects.

The term blackbody is ideal, and designates a body which radiates more electromagnetic energy for all wavelengths intervals than any other body of the same area and at the same temperature, and absorbs all the radiation it intercepts. Fig.1 presents one of the classical blackbody model.

blackbody model

Figure 1. A classical blackbody model.

The temperature of the blackbody determines the nature and extent of such radiation. Stefan-Boltzmann’s law says, that

the blackbody with a finite absolute temperature (T) emits radiant (ie, in all directions) electromagnetic radiation (EMR) per unit area of this blackbody and per second with intensity which is proportional to T4, according to an equation:

                                     ET = σ * T4,                                                     (2)

where,

ET - total EM energy emitted by the blackbody in all directions per unit area (1.m2and per unit time (1,s),W/m2;
σ  - Stefan-Boltzmann’s constant, equal to 5.67051*10-8, W/(m2*K4);
T  - an absolute temperature of the blackbody, K.

Fig. 2 shows the relationship between EMR emitted by a perfect blackbody as a function of temperature. The area under these curves is equal to the total energy (emitted by a black body) per second per unit area. This body at low temperatures emits EMR in the region of long wavelengths. This region spreads from far-infrared to microwave region (5 mm < λ < 100 mm, where λ  is the wavelength in mm, 10-6 m). With increasing the blackbody temperature, the emission peaks move into the region of shorter wavelengths. At very high temperatures the blackbody emits in the near visible wavelengths region. Visible region corresponds to the wavelengths from 0.7 mm (red) through 0.62 mm (orange), 0.58 mm (yellow), 0.53 mm (green), 0.47 mm (blue) to 0.42 mm (violet).

Real objects emit and absorb less EMR than blackbodies, and this difference is dependent on the wavelength, so nonblackbodies can not exactly follow relationship shown in Fig. 2. For this purposes corrections should be used, otherwise, the apparent temperature will be lower that the actual temperature. Also, it is necessary to take into account the loss of emitted radiation when it passes through the media between the emitting body and a measuring instrument.

 EM radiation

Figure 2. EM radiation emitted by the blackbody at various temperatures.


There are two types of pyrometers: optical (monochromatic or narrowband) and radiation (total radiation or broadband) pyrometers. The last devices originally were called radiation pyrometers, then radiation thermometers, and more recently infrared thermometers. However, the first their name (radiation pyrometers) is still widely used at present. These devices have high accuracy of ±0.01 °C as a standard instruments, and from ±0.5 to ±1% for industrial purposes.

a). Optical pyrometers, sometimes referred to as brightness thermometers, generally involve wavelengths only in the visible part of the spectrum. When the temperature of the body increases, so does the intensity at any particular wavelength. If two bodies have the same temperature, then intensities of those two objects are equal. In this type of a pyrometer the intensity of a certain wavelength of a heated body is compared with that of a heated platinum filament of a lamp (see Fig. 3 ).

optical pyrometer.

Figure 3. An optical pyrometer.


An object 1 which temperature is to be measured, emits electromagnetic radiation with intensity proportional to its absolute temperature. This radiation passes through lens 2 and red optical filter 3. Optical filter picks out only the desired wavelength - red. Then radiation focuses on the platinum filament of a lamp 4, and passes through another filter 5, lens 6, viewing system 7. The viewer 8 sees the platinum filament superimposed on an image of the object 1. When the temperature of the filament is low comparing with that of the object, the viewer sees the filament as a dark line on the bright background image of the object. The lamp 4 is connected in series with an electrical battery 9, a variable resistor 10 and an ampermeter 11. By reducing the resistance of the resistor an electrical current passing through the filament increases. So does the temperature of the filament and its brightness. For a certain value of an electrical current (corresponded to a certain value of an object temperature), the brightness of the platinum filament will match the brightness of the object 1. At this setting the viewer cannot distinguish between the image of the object and the filament. At this time the measurement of temperature is performed. The scale of the ampermeter is calibrated in the units of temperature.

The lower temperature limit for optical pyrometers is determined by the temperature at which objects become visible in red (about 225 °C). However, there are devices which are able to measure even lower temperatures down to -50 °C. The upper limit varies from 600 to 3000 °C, and is limited by the melting point of the platinum filament. An accuracy is typically varied from ±5 to ±10 K.

b). Radiation pyrometers, being very simple and cheap, use an exponential relationship between a total emitted EMR energy and given temperature. In radiation pyrometers (see Fig. 4) EMR energy emitted at infrared (2.5 < l < 20 mm) to visible wavelengths (0.42 < l < 0.7 mm) from an object 1 is focused by a spherical reflector 2 on a series of micro-thermocouples attached to a blackened platinum disc 3. The radiation is absorbed by the disc, which temperature is increased, so does thermal electromotive force U developed by the series of thermocouples. This thermal electromotive force is proportional to the temperature of hot junctions of thermocouples, and, finally, to the temperature of the object 1. The advantage of these pyrometers is that their operation slightly depends on the wavelength.


Figure 4. A total radiation pyrometer


The lower limits for radiation pyrometers vary from 0 to 600 °C, the upper limits vary from 1000 to 1900 °C. The accuracy varies from ±0.5 to ±5 K, depending on cost. They are widely used for temperature measurements in metal production facilities, glass industries, semiconductor processes, etc.

Article Source:: Dr. Alexander Badalyan, University of South Australia




0 comments:

Basics of Instrumentation & Control


To view more posts on BASICS : CLICK HERE

Pressure


To view more posts on PRESSURE : CLICK HERE

Flow


To view more posts on FLOW : CLICK HERE

Level


To view more posts on LEVEL : CLICK HERE

Temperature


To view more posts on TEMPERATURE : CLICK HERE

Analytical Instrumentation


To view more posts on Analytical Instrumentation : CLICK HERE
Related Posts Plugin for WordPress, Blogger...

About This Blog

Hai friends…welcome to my blog. This blog is exclusively for instrumentation engineering students which will provide sources for their reference and studies. As you all know Instrumentation is now a fast emerging and developing field in Engineering. This blog has different categories like PLC, SCADA, DCS, Sensors and Transducers, Computer control of process, Industrial Instrumentation, etc.

This blog will also provide an exclusive ‘ASK ME’ section where you can make any queries and share your ideas about instrumentation. The solution for your queries will be given to you by mail from best of my knowledge and reference.

So I wish this blog may be very useful for your studies and reference.

About Me

Keep In Touch

Follow Me!

Online Queries


Popular Posts